- Description
- Specifications
- Have a Question About This Item
- Shipping Policy
- Exchange, Returns, and Refunds Policy
Download Certification
Please Note: AX532S must be printed on your existing remote's IC Chip
VAE make many remotes that look identical so you must ensure AX532S is printed on yours. If HCS200 is printed, please click here for the correct remote.
There are also remotes made for Nissan, Mazda, Suzuki & Toyota and all had the car brands name printed on the case (which may now be worn off). This remote is not compatible with any of these types of remotes.
Battery: 2 x CR1616
Instructions:
The programming instructions below will work with most VISION / VGE alarm, immobiliser, central locking systems, EXCLUDING the following models:
C101, C201, SS2950, SS850, CL1000, CL1100, CL1500, CL1600, CL2000, AB960, TP360R, TP370R, VAE 318-2600, VAE 318-2700.
A. With at least one functioning transmitter
1. Arm the system and then disarm.
2. Within 20 seconds of disarming turn the ignition key OFF ON OFF 20 times,
or more until the indicators start flashing automatically leaving the key in the OFF position.
3. The vehicle indicators will flash ON OFF 20 times to indicate correct procedure entry.
4. After the 20th flash of the indicators, press each transmitter that you wish to program, when the system learns the transmitter, it will chirp the siren once and flash the vehicle indicators once.
Note: Maximum of 3 transmitters can be programmed on selected models
Note: You will also be required to press the previous working transmitter as well.
5. Once finished programming, turn the ignition key back to the ON position to exit from this mode.
B. With NO functioning transmitter (Selected models)
1. Disconnect power to the alarm module either by removing the 15 Amp fuse or the negative battery terminal.
Note: If the vehicle has a security coded radio, then once the battery terminal is removed the code will need to be reprogrammed back into the radio
2. Wait 15 seconds then reconnect power.
3. If no response is given from the alarm module after powering up then the alarm has powered up in the disarm state.
When in this mode continue with steps above A. Step 2 onwards.
4. If the system powers up in the armed state, then it will start triggering, in this mode you will need to MANUALLY OVERIDE the system by turning the ignition key from OFF ON OFF 10 times within 15 seconds. Once the system disarms then proceed with the 20 turns of the ignition as previously mentioned above A. Step 2 onwards.
Battery Type:
CR1616
Battery Access Type:
Tool Required
AS62368.1 Compliant:
Yes
Battery Included:
Yes
Contains Coin Battery:
Yes
Products are delivered Australia wide using Australia Post (Registered Post). Shipping costs are influenced by the size and weight of the product and your location, exact shipping costs are calculated in the shopping cart and will be added to the order total before checkout.
Orders are dispatched within 2 business days and shipping times are estimated at between 3-10 business days depending on your location within Australia. Please be aware deliveries outside of metropolitan areas may take longer. This service will require your signature when the parcel is delivered. If you are not available at time of delivery, a card will be left for you to collect your parcel from the nearest Post Office.
View Store PoliciesPlease choose carefully before you buy.
For faulty products, Remote Pro offer a 14 DAY REPLACEMENT WARRANTY, from the date you receive your product. They do not offer a satisfaction guarantee on any of their products, however due to their high level of customer service, they will always endeavour to keep customers happy and satisfied.
If your product is faulty, it will be replaced with an identical product. If they cannot replace the product, they will offer you the option of choosing another product of the same value, or provide you with a refund for the total value of the faulty product.
Please note: Standard postage fees apply to all return orders. Where the return relates to a faulty item, the replacement product will be sent out to you, at no charge, within 5 working days from the date we receive the faulty product.
When returning your product, please make sure you provide the following details:
- Your full name
- Your order number
- Reason why you are returning the product
- Your instructions informing us how you would like the issue resolved.
Please include the original order confirmation or invoice you received with your product. Also, if you haven't previously provided a contact phone number, please include this with your return. This will ensure the issue is resolved quickly, should anyone need to contact you.