Lockwood 2616CO Mechanical Coordinator for Double Doors - 2616COSSS

Design Compact modern design to suit double door installations.

Fire Rated The Lockwood 2616CO Door Control System has been successfully fire tested up to 4 hours on fire door assemblies in accordance with Australian Standard AS1905.1:2005 - Part 1: Fire Resistant Doorsets.

Flexibility in Installation

Easy to install on narrow frames (40mm) One unit suits both push side or pull side Push side application add: 1 x FD2616-117SIL angle bracket 2 x FD2616-116SIL angle brackets

Door Sizes Double door applications minimum 1250mm, maximum 2800mm

Opening Angles Maximum opening angle 130°

Double Door Function The mechanical coordinator keeps the active door open when inactive door is open. Active door starts to close when the inactive door is almost closed. After the active door is closed it latches the inactive door.

Products are delivered Australia wide using the most cost effective freight company, recommended by shippit. Shipping costs are influenced by the size and weight of the product and your location, exact shipping costs are calculated in the shopping cart and will be added to the order total before checkout.

Orders are dispatched within 8 business days and shipping times are estimated upto 15 business days. Depending on your location within Australia. Please be aware deliveries outside of metropolitan areas may take longer. This service will require your signature when the parcel is delivered. If you are not available at time of delivery, a card will be left for you to collect your parcel from your nearest freight outlet.

Return of Products
1. The Customer is deemed to have accepted a delivery of Products: within 48 hours after delivery unless prior to that time the Customer has notified Lockworx Australia in writing of its rejection of that delivery and reasons for the rejection are accepted by Lockworx Australia; or
2. Immediately upon use of the products, whichever is the earlier: If Lockworx Australia’s Products are used or Lockworx Australia does not receive notification of rejection of the Products within the 48 hours, Lockworx Australia will be entitled to payment in full, and thereafter Lockworx Australia will not be liable for any claims, loss or damage, however it arises.
3. Notwithstanding any other rights Lockworx Australia may have, Lockworx Australia reserves the right to charge a Customer for any costs or losses incurred by Lockworx Australia arising, directly or indirectly, from the return of any Products which are not damaged or defective; from the unauthorised return of Products; or where the Customer exceeds the time frames for inspection and acceptance set out in these Terms and Conditions.

Refund and Exchange Policy
If a Customer receives damaged or defective Products, the Customer must notify Lockworx Australia in writing, within 48 hours of delivery of Products of the Customer’s intention to return the Products. Lockworx Australia may investigate that matter and may authorise the return of the goods and endeavor to replace the products, subject to availability, within 14 days of being notified by the Customer of the intention to return the Products, or at Lockworx Australia’s absolute discretion, issue a credit note to the Customer, to the value of the Product but Lockworx Australia will not be liable for any damage or loss howsoever caused arising from replacement of the Products or issue of the credit note, save that Lockworx Australia must comply with all non-excludable obligations under the Trade Practices Act.

For all other terms and conditions. Please refer to our website www.lockworxaustralia.com.au